124-349 Modal Break Point Restoration Fail Rap; 124-350 Crum Oem Fail All Rap - Xerox workcentre 5335 series Service Manual

124-349 Modal Break Point Restoration Fail RAP

BSD-ON: BSD 3.8 - Electronic Billing
System Fail. Modal Break Point Fail (One mismatches the others but cannot be automatically
repaired.) When one Modal Break Point did not match, this machine tried to automatically cor-
rect it but failed.
Procedure
Power OFF then ON. If the problem persists, perform the following:
In NVM Read/Write compare the values in the following NVMs:
If the values in both 720-057 and 720-064 are the same, replace the MCU PWB
18.2).
Reload software GP 16. If they are different, replace the ESS PWB.
Initial Issue
WorkCentre 5335 Family Service Documentation

124-350 CRUM OEM Fail All RAP

System Fail. All three CRUM OEM destinations are not set (0 or different values are set). The
CRUM OEM destinations stored in three positions match but their values are not set (0).
Procedure
• Go to the Fault Code for the color that displays an error:
– 093-926
• Reload software
(PL
07/2011
2-975
BUS Updated 12/2011
Toner CRUM Data Mismatch Fail RAP
GP 16. Replace the machine, or replace the MCU Board (PL 18.2).
Status Indicator RAPs
124-349, 124-350