093-956 Dev Install Mode Fail Rap - Xerox workcentre 5335 series Service Manual

• The connection terminals between the Toner Cartridge CRUM PWB and the Toner
CRUM PWB for damage and foreign substances
• The Toner Cartridge for improper installation
If no problems are found, replace the following parts in sequence:
• Toner Cartridge (PL 8.1)
• Toner CRUM PWB (PL 8.2)
• MCU PWB (PL 18.2)
Initial Issue
WorkCentre 5335 Family Service Documentation

093-956 Dev Install Mode Fail RAP

BSD-ON: BSD 9.1 - CRU Life Control
In the Install Developer mode after the installation of the Xerographic Cartridge, no picture is
painted on the patch. (The seal is left unremoved.)
Procedure
Peel off the developer seal from the Xerographic Cartridge.
07/2011
2-837
BUS Updated 12/2011
Status Indicator RAPs
093-926, 093-956