Xerox workcentre 5335 series Service Manual page 1067

5. Disconnect the ESS PWB connectors (9)
Figure 4 ESS PWB PJ's
6. Perform the following (Figure 5).
a. Remove the Screws (3) on the left side of the PWB.
b. Loosen the center and right side Screws (6).
a
Figure 5 Removing Screws
Repairs & Adjustments
REP 3.3
(Figure 4).
b
BUS Updated 12/2011
7. Remove the left side of the PWB panel
a. Remove the PWB connector Screws (5).
b. Remove the panel left side Screws (5).
b
Figure 6 Removing Screws
8. Remove the ESS PWB (6 Screws)
Figure 7 Removing Screws
07/2011
4-6
(Figure 6).
a
(Figure 7).
8
WorkCentre 5335 Family Service Documentation
Initial Issue