Rep 7.4 Tray 4 Cable - Xerox workcentre 5335 series Service Manual

REP 7.4 Tray 4 Cable

Parts List on PL 11.5
Removal
NOTE: This procedure shows the removal of the Front Cables, the steps to remove and
replace the Rear Cables are the same.
NOTE: The Screws used in the Tray are of different Length and Threads, keep the screws with
the parts for correct replacement.
1. Switch off the power and disconnect the power cord.
2. Remove Paper Tray 4 REP 7.1.
3. Remove the Cover (Figure 1):
a. Remove the Screws (2).
b. Remove the Cover.
Figure 1 Cover Removal
Repairs & Adjustments
REP 7.4
4. Remove the Screws (2) and the Brake
5. Remove the Screw (1) and Spring
07/2011
4-58
BUS Updated 12/2011
(Figure 2).
Figure 2 Brake Removal
(Figure 3).
Figure 3 Spring Removal
WorkCentre 5335 Family Service Documentation
Initial Issue