133-222 Fax Card Does Not Respond Rap; 133-223 Fax Card Reset Rap - Xerox workcentre 5335 series Service Manual

133-222 Fax Card does not respond RAP

BSD-ON: BSD 34.1 - FAX
The FAX PWB did not respond within the specified time.
Procedure
• Turn the power Off/On.
• Check the USB connection. If OK then replace the USB cable
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWB's in the FAX Module)
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic GP 13
• Replace the Fax PWB (PL 18.5)
Initial Issue
WorkCentre 5335 Family Service Documentation

133-223 Fax Card Reset RAP

BSD-ON:
The controller reset when the FAX PWB did not respond.
Procedure
• Turn the power Off/On.
(PL 18.5). • Check the USB connection. If OK then replace the USB cable
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWB's in the FAX Module)
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic
• Replace the Fax PWB
07/2011
2-1003
BUS Updated 12/2011
BSD 34.1 - FAX
GP 13
(PL 18.5)
(PL 18.5).
Status Indicator RAPs
133-222 , 133-223