Xerox workcentre 5335 series Service Manual page 1113

8. Turn the Control Panel so that the screen is face up.
9. Remove the self-tapping screw that secures the UI Lower Cover
Figure 5 UI Lower Cover Removal
10. Turn the Control Panel upside down.
11. Remove the UI Lower Cover (Figure
(1) Remove the self-tapping screws (x9).
(2) Remove the UI Lower Cover.
Figure 6 UI Lower Cover Removal
12. Remove the Base Frame (Figure 7).
(1) Remove the self-tapping screws (x7).
(2) Remove the Base Frame.
Repairs & Adjustments
REP 6.11
(Figure 5).
1. Remove the screw
6).
BUS Updated 12/2011
Figure 7 Base Frame Removal
Replacement
1. To install, carry out the removal steps in reverse order.
07/2011
4-52
Initial Issue
WorkCentre 5335 Family Service Documentation