074-102 Feed Out Sensor 2 On Jam (Tray 3/4); Rap; 074-103 Feed Out Sensor 3 On Jam (Tray 4) - Xerox workcentre 5335 series Service Manual

074-102 Feed Out Sensor 2 On Jam (Tray3/4)
BSD-ON: BSD 8.2 - IOT Paper Transportation
BSD-ON: BSD 8.3 - Paper Transportation (Tandem Tray Module)
Tray 2 Feed Out Sensor is not turned ON by the paper in specified time from Tray 3/4 Feed
Start.
Procedure
Clear the paper jam. Operate the printer from Tray 2. A 072-101 misfeed occurs.
Y N
Operate the printer from Tray 3. A 073-101 misfeed occurs.
Y N
Check the following:
• A paper transportation failure due to a foreign substance/burr on the paper path
between the Tray 3/4 Module and the Tray 2 Feedout Sensor
• The Feed Out Sensor for contamination, improper installation, and Actuator
operation failure
• Use of paper out of spec
Go to 073-101 Tray 3 Misfeed RAP.
Go to 072-101 Tray 2 Misfeed RAP.
Status Indicator RAPs
074-102, 074-103
074-103 Feed Out Sensor 3 On Jam (Tray4)
BSD-ON: BSD 8.3 - Paper Transportation (Tandem Tray Module)
Tray 3 Feed Out Sensor is not turned ON by the paper in specified time from Tray 4 Feed Start.
Procedure
Clear the paper jam. Operate the printer from Tray 3. A 073-101 misfeed occurs.
Y N
Check the following:
• A paper transportation failure due to a foreign substance/burr on the paper path
between Tray 3 and Tray 4 Feedout Sensor
• The Feed Out Sensor for contamination, improper installation, and Actuator opera-
tion failure
• Use of paper out of spec
Go to 073-101 Tray 3 Misfeed RAP.
07/2011
2-798
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation