116-314 Ethernet Address Rap; 116-315 System Memory Dimm R/W Check Rap - Xerox workcentre 5335 series Service Manual

116-314 Ethernet Address RAP

An Ethernet address error is detected.
Initial Actions
Power Off/On
Procedure
• Check the EEPROM on the ESS.
• Change the system data 700-530 to "0" and disable the automatic startup boot operation
at SystemFail (make sure to reset to 1 when complete
• Specially check for faulty ports or Net connection. Check which of the following ports is
faulty.
– SNTP
– NetWare
– Salutation IO
– SMB
– Port 9100
– USB
– lpd
– FTP Serv
– MailIO
– IPP
– Check the sw version of the controller sw - update if required
– Replace ESS PWB (PL 35.2) (If not fixed by this, reinstall the original ESS PWB)
Status Indicator RAPs
116-314, 116-315

116-315 System Memory DIMM R/W Check RAP

An error is detected during the Read/Write operation of the System Memory DIMM.
Initial Actions
Power Off/On
Procedure
• Pull out and insert the System Memory DIMM.
• Check the sw version of the controller sw - update if required
• If the problem persists, replace the System Memory DIMM
• If the problem persists, replace the ESS PWB
07/2011
2-850
BUS Updated 12/2011
(PL 35.2).
(PL 35.2).
Initial Issue
WorkCentre 5335 Family Service Documentation