117-325 Contract Manager Rtc Hardware Fail; 117-326 Ess Nvram Sw Access Fail - Xerox workcentre 5335 series Service Manual

117-325 Contract Manager RTC Hardware Fail

Failed to obtain RTC timer value due to hardware problem in the contract function
Procedure
Turn the power OFF, make sure that the Control Panel has turned OFF, and then turn the
power ON again.
Initial Issue
WorkCentre 5335 Family Service Documentation

117-326 ESS NVRAM SW Access Fail

When acessing the NVRAM data during start up or operation, a software malfunction where
the software parameters detected by the OSDD is mismatched, etc. occurs.
Procedure
Turn the power OFF, make sure that the Control Panel has turned OFF, and then turn the
power ON again.
07/2011
2-915
BUS Updated 12/2011
Status Indicator RAPs
117-325, 117-326