Rep 10.9 Exit 2 Motor - Xerox workcentre 5335 series Service Manual

REP 10.9 Exit 2 Motor

Parts List on PL 17.5
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Exit 2 Assembly REP 10.5.
3. Perform the following (Figure 1).
a. Disconnect the motor PJ.
b. Remove the Rear Cover (1 Screw).
a
Figure 1 Removing Screw & PJ
Repairs & Adjustments
REP 10.9
4. Remove the Screws (2) and the Exit 2 Motor
b
Replacement
1. To install, carry out the removal steps in reverse order.
07/2011
4-90
BUS Updated 12/2011
(Figure 2).
4
Figure 2 Removing Screws
WorkCentre 5335 Family Service Documentation
Initial Issue