116-361 Spool Hdd Rap; 116-362 Ssdp Software Rap - Xerox workcentre 5335 series Service Manual

116-361 Spool HDD RAP

The controller spool detected an error during HDD access.
Initial Actions
Power Off/On
Procedure
• Check the HDD electrical connections
• Check the sw version of the controller sw - update if required
• If the problem persists perform Hard Disk Failure Prediction
• Perform GP 14 - only the first two parts - make sure to follow sequence and heed cau-
tions
1. Job Log Clear Mode
2. HDD Initialize Mode
• Replace HDD (PL 35.2)
• Replace ESS PWB (PL 35.2) (If not fixed by this, reinstall the original ESS PWB)
Status Indicator RAPs
116-361, 116-362
(PL 35.2).
Test.
BUS Updated 12/2011

116-362 SSDP Software RAP

An internal shutdown occurred after an SSDP (Simple Service Discovery Protocol) processing
error.
Initial Actions
Power Off/On
Procedure
• Check the HDD electrical connections
• Check the sw version of the controller sw - update if required
• If the problem persists perform
• Perform GP 14 - only the first two parts - make sure to follow sequence and heed cau-
tions
1. Job Log Clear Mode
2. HDD Initialize Mode
• Replace HDD (PL 35.2)
• Replace ESS PWB (PL 35.2) (If not fixed by this, reinstall the original ESS PWB)
07/2011
2-870
(PL 35.2).
Hard Disk Failure Prediction Test.
WorkCentre 5335 Family Service Documentation
Initial Issue