016-793 MF I/O HD Full RAP
MF I/O HD Full. The HDD capacity was insufficient.
Procedure
•
Delete the files in the HDD. Or, initialize the HD
•
Disconnect then reconnect the HDD, ESS, MCU all PWBs connected to them (RAM,
Firmware module, EEPROM)
•
Check the sw version of the controller sw - update if required
•
Perform
GP 14
- only the first two parts - make sure to follow sequence and heed cau-
tions
1.
Job Log Clear Mode
2.
HDD Initialize Mode
•
Replace HDD
(PL
35.2)
•
Replace ESS PWB
(PL
35.2) (If not fixed by this, reinstall the original ESS PWB and RAM
DIMM.)
Status Indicator RAPs
016-793, 016-794
(Initialize Hard
Disk).
(GP
16)
07/2011
2-276
BUS Updated 12/2011
016-794 Media Reader Not Installed RAP
Media Reader: Media No Insert.
Procedure
•
Check that the Media is installed.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
(GP
16)
Initial Issue
WorkCentre 5335 Family Service Documentation