Table of Contents
Advertisement
033-545 T0 Timeout RAP
BSD-ON:
BSD 34.1 - FAX
Initial Actions
(3-Line Fax option only) If this fault occurs only when attempting a broadcast fax and when
attempting a broadcast fax the first fax job will complete but the next number is never dialed,
check if there is a phone line connected to all three ports. If not then configure the empty ports
to receive only.
Procedure
•
Machine on the other end may not be a fax machine. Check number.
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the PWB's in the FAX Module
•
Check the sw version of the fax & controller sw - update if required
•
Perform FAX Diagnostic
GP 13
•
Replace the FAX PWB
(PL
18.5)
Status Indicator RAPs
033-545, 033-546
033-546 No Dial Tone RAP
BSD-ON:
BSD 34.1 - FAX
Procedure
•
Check the status of the machine on the other end, and retry fax job.
•
Check phone line connection, grounding, electrical noise
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the PWB's in the FAX Module
•
Check the sw version of the fax & controller sw - update if required
•
Perform FAX Diagnostic
•
Replace the FAX PWB
07/2011
2-544
BUS Updated 12/2011
GP 13
(PL
18.5)
WorkCentre 5335 Family Service Documentation
Initial Issue
Advertisement
Table of Contents
