124-314 IOT Speed RAP
BSD-ON:
BSD 3.8 - Electronic Billing
The IOT is not running at the correct speed.
Procedure
Turn the power OFF then ON. If the problem persists, perform the following procedure to
repair it.
Reload software
GP
16. Replace the MCU PWB
Go to
Machine ID/Billing
Data.
Initial Issue
WorkCentre 5335 Family Service Documentation
(PL
18.2) and the ESS PWB
(PL
35.2).
07/2011
2-959
BUS Updated 12/2011
124-315 IOT Speed Mismatch RAP
BSD-ON:
BSD 3.8 - Electronic Billing
There is an IOT speed mismatch.
Procedure
Execute
NVM
Read/Write. Compare the values in the following NVM locations:
[700-600]
[700-601]
[700-602]
The 3 values match.
Y
N
Go to
Machine ID/Billing
Data.
Reload software
GP
16. Replace the MCU PWB
(PL
18.2) and the ESS PWB
(PL
35.2).
Status Indicator RAPs
124-314, 124-315