016-328 Cont-MCU Cable Connection Fail RAP
The controller has detected a failure at its cable connection with the MCU.
Procedure
Turn the power OFF and ON.
If the problem persists, perform the following:
1.
Check the connection of the cable between the controller and MCU.
2.
Replace the cable.
Initial Issue
WorkCentre 5335 Family Service Documentation
016-330 Memory Diag Fail-1 RAP
BSD-ON:
BSD 16.1 - ESS
Cont SystemMemory Diag Fail-1. Capacity of Slot1 loaded memory is out of spec.
Procedure
•
Power Off/On.
•
Check the sw version of the controller sw - update if required
•
Remove/insert ESS RAM DIMM.
•
Replace ESS RAM DIMM
•
Replace ESS PWB
07/2011
2-157
BUS Updated 12/2011
(PL
35.2).
(PL
35.2).
016-328, 016-330 Memory Diag Fail-1 RAP
Status Indicator RAPs