033-318 Image Processing Error Rap; 033-319 Fax Cont2 Sw Fail Rap - Xerox workcentre 5335 series Service Manual

033-318 Image Processing Error RAP

BSD-ON: BSD 34.1 - FAX
Fatal error occurred in Fax Imaging Processing
Procedure
• Repeat the operation.
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWB's in the FAX Module
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic GP 13
• Replace the Fax PWB (PL 18.5)
Initial Issue
WorkCentre 5335 Family Service Documentation

033-319 Fax Cont2 SW Fail RAP

BSD-ON: BSD 34.1 - FAX
Failure occurred during Fax Cont2 software processing, and cannot continue processing.
Procedure
• Switch the power off, then on.
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Perform FAX Diagnostic
• Disconnect then reconnect the PWB's in the FAX Module
• Check the sw version of the fax & controller sw - update if required
• Replace the Fax PWB
07/2011
2-511
BUS Updated 12/2011
GP 13
(PL 18.5)
033-318, 033-319
Status Indicator RAPs