Rep 8.7 Takeway Motor Assembly - Xerox workcentre 5335 series Service Manual

REP 8.7 Takeaway Motor Assembly
Parts List on PL 15.1
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the MSI Assembly REP 7.2.
3. Disconnect the following connectors
a. Takeaway Motor connector.
b. MCU PWB top and right side connectors, and release the wires from the clamps.
Disconnect
Figure 1 P/Js
4. Perform the following (Figure 2)
a. Remove the MCU PWB chassis Screws (7).
b. Move the MCU PWB chassis to the left.
Repairs & Adjustments
REP 8.7
(Figure 1).
T/A Motor
connector
BUS Updated 12/2011
Figure 2 Removing Screws
5. Remove the Screws (3) and the Takeaway Motor
Screws
Figure 3 Removing Screws
Replacement
1. To install, carry out the removal steps in reverse order.
07/2011
4-68
(Figure 3).
Initial Issue
WorkCentre 5335 Family Service Documentation