Table of Contents
Advertisement
REP 7.2 MSI Assembly
Parts List on
PL 13.1
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the following covers
(Figure
a.
Pull off the ESS Cap Cover.
b.
ESS Cover (2 Screws).
c.
Left Rear Middle Cover (2 Screws).
d.
Rear Lower Cover (3 Screws).
a
b
Figure 1 Removing Covers
Repairs & Adjustments
REP 7.2
1).
c
d
BUS Updated 12/2011
3.
Perform the following steps
(Figure
a.
Remove the Left Rear Covers (1 Screw).
b.
Remove the Left Rear Lower Cover (1 Screw).
c.
Disconnect
P/J406
from the MCU PWB and release the wire harness to the MSI
from the clamps.
c
Figure 2 Removing Screws
07/2011
4-54
2).
a
b
Initial Issue
WorkCentre 5335 Family Service Documentation
Advertisement
Table of Contents
