REP 12.1 Integrated Office Finisher
Parts List on
PL 22.1
Removal
1.
Switch off the power and disconnect the power cord.
2.
Disconnect the Integrated Office Finisher Wire Harness:
(1)Remove the
Cover.(Figure
1)
1
Remove Cover
Figure 1 Remove Cover
(2)Remove Clamp.
(Figure
2)
(3)Disconnect Connectors (2).
(Figure
Initial Issue
WorkCentre 5335 Family Service Documentation
2)
BUS Updated 12/2011
2
Remove Clamp
Figure 2 Disconnect Connectors
3.
Loosen the Thumb Screws (2)
07/2011
4-95
3
Disconnect Connectors (2)
(Figure
3):
Repairs & Adjustments
REP 12.1