Table of Contents
Advertisement
Figure 10 Installing Ball End
5.
Install the spring end of the Carriage Cable
(1) Peel off the tape that secures the cable.
(2) Hang the cable on the pulley.
(3) Hang it on the pulley at the rear of Half Rate Carriage.
(4) Hang the spring on the Cable and attach it to the Frame.
Figure 11 Carriage Cable Spring End
6.
Affix the cable to the Full Rate Carriage
(1) Peel off the tape.
(2) Move the Full Rate Carriage to the notch on the frame.
Initial Issue
WorkCentre 5335 Family Service Documentation
(Figure
11)
(Figure
12)
BUS Updated 12/2011
(3) Affix the cable to the Full Rate Carriage.
Figure 12 Full Rate Carriage
7.
Adjust the position of Full Rate/Half Rate Carriages
8.
Restore the machine to its original state.
07/2011
4-43
(ADJ
6.2).
Repairs & Adjustments
REP 6.5
Advertisement
Table of Contents
