033-712 Fax Control Rap; 033-713 Fax Control Rap - Xerox workcentre 5335 series Service Manual

033-712 Fax Control RAP

BSD-ON: BSD 34.1 - FAX
Memory is at maximum limit.
Initial Actions
Power Off/On
Procedure
• Ask customer to cancel the job and resend.
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWB's in the FAX Module
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic GP 13
• Replace the FAX PWB (PL 18.5)
Initial Issue
WorkCentre 5335 Family Service Documentation

033-713 Fax Control RAP

BSD-ON: BSD 34.1 - FAX
The Chain-Link does not exist.
Initial Actions
Power Off/On
Procedure
• Ask customer to cancel the job and resend.
• Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
• Disconnect then reconnect the PWB's in the FAX Module
• Check the sw version of the fax & controller sw - update if required
• Perform FAX Diagnostic
• Replace the FAX PWB
07/2011
2-567
BUS Updated 12/2011
GP 13
(PL 18.5)
033-712, 033-713
Status Indicator RAPs