Xerox workcentre 5335 series Service Manual page 1093

5. Remove the housing. (Figure 3)
(1) Remove the housing in the direction of the arrow.
Figure 3 Housing Removal
6. Remove the Nudger Roll and the Feed Roll.
(1) Remove the Nudger Roll.
(2) Remove the Feed Roll.
Figure 4 Nudger/Feed Roll Removal
Replacement
1. To install, carry out the removal steps in reverse order.
2. Install the Nudger/Feed Roll while aligning them as shown in the figure.
Repairs & Adjustments
REP 5.18
(Figure 4)
(Figure 5)
BUS Updated 12/2011
Figure 5 Nudger/Feed Roll Alignment
3. Go to HFSI Counter and reset Counter 955-806.
07/2011
4-32
Initial Issue
WorkCentre 5335 Family Service Documentation