016-233 SW Option Fail (USB Host Failed or Not Installed)
RAP
BSD-ON:
BSD 16.1 - ESS
SW optional function not achieved. Any one of the SW optional functions cannot be used
because the USB Host has a failure/is not installed. When the SW optional function is being
enabled, the USB port (and USB Host Card) for the ESS PWB
not installed or having errors.
Procedure
•
Turn the power OFF then ON.
•
Check the sw version of the controller sw - reload Software
•
If the problem persists, install the USB Host Card on the ESS PWB, replace the ESS
PWB
(PL
35.2).
Status Indicator RAPs
016-233, 016-234
016-234 XCP Out of Memory Error RAP
XCP stops when JVM is unable to function due to insufficient memory space.
Initial Actions
Power Off/On. The software module that runs Java within the Controller has ran out of memory
and became unable to continue operating.
(PL
35.2) was detected to be
Procedure
If the problem persists perform
(GP
16)
07/2011
2-148
BUS Updated 12/2011
Initialize Hard
Disk.
WorkCentre 5335 Family Service Documentation
Initial Issue