016-760 PS Decompose Failure RAP
PS Decompose Failure. An error occurred during postscript (option) processing.
Procedure
•
Set a print mode to 'Speed Preferred.'
•
Resend the job. (If the problem persists, check the execution environment and data.)
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
016-761 FIFO Empty RAP
FIFO Empty. Image expansion error (FIFO empty error).
Procedure
Print in the Speed Preferred mode. If this does not resolve the problem, use the Print
Guarantee mode for print. (Only for the machine with this mode.)
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
Check the sw version of the controller sw - update if required
(GP
16)
07/2011
2-259
BUS Updated 12/2011
(GP
16)
Status Indicator RAPs
016-760, 016-761