REP 4.1 Main Drive
Parts List on
PL 3.1
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the following covers
(Figure
a.
Pull off the ESS Cap Cover.
b.
ESS Cover (2 Screws).
c.
Left Rear Middle Cover (2 Screws).
d.
Fax Cover, and Rear Upper Cover (2 Screws).
e.
Rear Lower Cover (3 Screws).
a
b
Figure 1 Removing Covers
Initial Issue
WorkCentre 5335 Family Service Documentation
1).
d
c
e
BUS Updated 12/2011
3.
Remove the Fuser Exhaust Fan Assembly
a.
Disconnect the connector.
b.
Remove the Screw (1) and the fan assembly.
Figure 2 Fuser Exhaust Fan
4.
Disconnect the following connectors
a.
Takeaway Motor connector.
b.
MCU PWB top and right side connectors, and release the wires from the clamps.
b
07/2011
4-11
(Figure
2).
b
a
(Figure
3).
a
Figure 3 PJ's
Repairs & Adjustments
REP 4.1