016-507 Image Log Send Rap; 016-508 Image Log Rap - Xerox workcentre 5335 series Service Manual

016-507 Image Log Send RAP

BSD-ON: BSD 16.1 - ESS
The Image Log send command 1 in the HDD failed. A log image transfer fails, making it impos-
sible to continue a target job which will consist of created images. With the system data "Auto
Transfer Setting" set to "Transfer by the job" a log image transfer fails, making it impossible to
continue a target job.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Initialize Hard
If the problem persists, replace the HDD (PL
Status Indicator RAPs
016-507, 016-508
Disk.
35.2).
BUS Updated 12/2011

016-508 Image Log RAP

BSD-ON: BSD 16.1 - ESS
The Image Log send command 2 in the HDD failed. A log image transfer fails, making it impos-
sible to continue an image transfer job.
Initial Actions
Power Off/On. Check the state of the destination image log control server and that of the net-
work, and clear any factor preventing image logs from being transferred to the image log con-
trol server.
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Initialize Hard
If the problem persists, replace the HDD
07/2011
2-188
Disk.
(PL 35.2).
Initial Issue
WorkCentre 5335 Family Service Documentation