018-400 Ipsec Error (Configuration Mismatch) Rap; 018-401 Inconsistent Sip Configuration Rap - Xerox workcentre 5335 series Service Manual

Table of Contents

Advertisement

018-400 IPSEC Error (Configuration Mismatch) RAP

While IPSEC is set to Enable, password is not set in authentication mode = [Pre-shared key] or
IPSEC certificate is not set in authentication mode = [Digital signature].
Procedure
Make IPSEC setting consistent with Authentication mode and enable IPSEC again. Inconsis-
tency in IPSEC setting: Password is not set with Authentication mode = [Pre-shared Key] or
Authentication mode = IPSEC certificate is not set with [Digital signature].
Initial Issue
WorkCentre 5335 Family Service Documentation

018-401 Inconsistent SIP Configuration RAP

One of the following has been detected: the "IP Operation Mode setting" and the "Method of
Obtaining SIP Server Address setting" on the device are inconsistent with each other, or the
"IP Operation Mode setting" and the "SIP Server Address setting" are inconsistent.
Procedure
When "IP Operation Mode" is set to IPv4 and "IP Address Obtainment Mode" is manually
set, set "Method of Obtaining SIP Server Address" to "manual".
In any case except when "IP Operation Mode" is set to IPv4 and "IP Address Obtainment
Mode" is manually set, set "Method of Obtaining SIP Server Address" to "manual" or
DHCP.
When "IP Operation Mode" is set to IPv6, set "Method of Obtaining SIP Server Address"
to "manual" or DHCPv6.
If "Method of Obtaining SIP Server Address" is set to "manual" and the address is set
using FQDN strings, set up the DNS Server in the way that enables DNS to properly solve
an address problem.
When "IP Operation Mode" is set to IPv4 and "IP Address Obtainment Mode" is manually
set, set up SIP Server Address using an IPv4 address or FQDN strings.
When "IP Operation Mode" is set to IPv6, set up SIP Server Address using an IPv6
address or FQDN strings.
It is mandatory to set up Primary SIP Registrar Server Address and Primary SIP Proxy
Server Address.
07/2011
2-295
BUS Updated 12/2011
Status Indicator RAPs
018-400, 018-401

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 5335 series

Table of Contents