021-733 Accessory Error RAP
Job Fail. Color is inhibited or card limit value is reached while Accessory is mounted.
Procedure
Power OFF/ON. If the problem persists, perform the procedures:
•
Operate color limitation KeySW to enable color, or to replace the card by a card of which
upper limit value for color is not reached.
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
•
Replace RAM DIMM on ESS PWB
(PL
•
Replace ESS PWB
(PL
35.2) (If not fixed by this, reinstall the original ESS PWB and RAM
DIMM)
Initial Issue
WorkCentre 5335 Family Service Documentation
35.2)
BUS Updated 12/2011
021-941 Scan Service Paused By Disable RAP
With a Foreign Device accessory installed, the card was missing, insufficient fee paid or a
shortage of card value.
Procedure
Insert a Xerox card, copy card or cash into the accessory, and ensure that there are sufficient
fees or card value.
07/2011
2-371
Status Indicator RAPs
021-733, 021-941