Table of Contents
Advertisement
6.
Remove the E-Ring
(Figure
4).
Figure 4 E-Ring Removal
7.
Release the Cables from the Shaft
(Figure
a.
Slide the Pulley.
b.
Release the Cables from the Shaft detente.
Figure 5 Cable Release
Initial Issue
WorkCentre 5335 Family Service Documentation
5):
BUS Updated 12/2011
8.
Remove the Guide
(Figure
6):
a.
Remove the Screw (1).
b.
Remove the Guide.
Figure 6 Guide Removal
9.
Remove the Cables
(Figure
7):
a.
Remove the Pulleys (2).
b.
Raise the Plate and remove the Cables through the plate holes.
Figure 7 Cable Removal
Replacement
NOTE: Be careful not to twist or cross over the cables when installing them.
1.
To install, carry out the removal steps in reverse order.
07/2011
4-59
Repairs & Adjustments
REP 7.4
Advertisement
Table of Contents
