016-778 Hd Full - Scan Image Convert Rap; 016-779 Scan Image Conversion Error Rap - Xerox workcentre 5335 series Service Manual

016-778 HD Full - Scan Image Convert RAP

Insufficient HDD capacity was detected during scanned image conversion process in I-Format-
ter. HDD Full was detected when opening/writing file for operation
Initial Actions
Power Off/On
Procedure
• Free up some HDD space and scan again.
• Disconnect/reconnect HDD
• Check the sw version of the controller sw - update if required
• Perform GP 14 - only the first two parts - make sure to follow sequence and heed cau-
tions
1. Job Log Clear Mode
2. HDD Initialize Mode
• Replace HDD (PL 35.2)
• Replace ESS PWB (PL 35.2) (If not fixed by this, reinstall the original ESS PWB and RAM
DIMM.)
Status Indicator RAPs
016-778 , 016-779

016-779 Scan Image Conversion Error RAP

Scan Image Conversion Error. An error occurred during scan image conversion processing.
Procedure
• Repeat the operation.
• If an error occurs when scanning a relatively large-size document such as A3 with [Scan
Resolution 600dpi] specified, reduce the scan resolution to 400dpi or less and operate
again.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - update if required
(GP 16)
07/2011
2-268
BUS Updated 12/2011
(GP 16)
Initial Issue
WorkCentre 5335 Family Service Documentation