016-509 Image Log Rap; 016-510 Image Log Rap - Xerox workcentre 5335 series Service Manual

016-509 Image Log RAP

BSD-ON: BSD 16.1 - ESS
The Image Log block send command 1 in the HDD failed. With the system data "Auto Transfer
Setting" set to "Transfer by the job," transfer rules are not registered, causing a job to be dis-
continued.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power. Register rules for transfer from the destination image log control
server to the device.
If the problem persists perform Initialize Hard
If the problem persists perform GP 16 Special Boot Modes HDD Initialization.
If the problem persists, replace the HDD (PL
Initial Issue
WorkCentre 5335 Family Service Documentation
Disk.
35.2).
BUS Updated 12/2011

016-510 Image Log RAP

BSD-ON: BSD 16.1 - ESS
The Image Log block send command 2 in the HDD failed.
Initial Actions
Power Off/On. Rules for log image transfer are not registered. Because transfer rules are not
registered, a transfer fails. Register rules for transfer from the destination image log control
server to the device.
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Initialize Hard
If the problem persists, replace the HDD
07/2011
2-189
Disk.
(PL 35.2).
Status Indicator RAPs
016-509, 016-510