016-799 Print Instruction Failure RAP
Print Instruction Fail. A print parameter was incorrect.
Procedure
•
Perform the job again.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
016-910 Required Resource Not Ready (IOTsc detect) RAP
Requested paper or staple is not ready to perform a job.
Procedure
•
Perform the job again.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
(GP
16)
•
Check the sw version of the controller sw - update if required
07/2011
2-279
BUS Updated 12/2011
(GP
16)
Status Indicator RAPs
016-799, 016-910