016-750 Print Job RAP
The control logic detected an error in the print job ticket.
Initial Actions
Power Off/On
Procedure
•
Refer customer to User Guide section Change Print Settings or Print Mode Settings.
•
When the customer uses applications such as "ContentsBridge2005", etc. to send PDF
directly, the machine received the print job ticket that was sent together with the PDF.
However, the print job ticket data is either "Text that is not supported in this machine" or
"Print instruction that is not supported in this machine".
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Status Indicator RAPs
016-750, 016-751
016-751 PDF Error RAP
One of the following errors occurred while performing PDF Bridge processing:
•
Syntax error
•
Use of undefined commands
•
Parameter error
•
Broken PDF file
•
Internal error
Initial Actions
Power Off/On
Procedure
•
Ask customer to print using the driver from Acrobat Reader.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
07/2011
2-254
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation