033-320 Controller No Response on Booting RAP
BSD-ON:
BSD 34.1 - FAX
Controller does not respond to Fax within a specified time at booting
Procedure
•
Switch the power off, then on.
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the PWB's in the FAX Module
•
Check the sw version of the fax & controller sw - update if required
•
Perform FAX Diagnostic
GP 13
•
Replace the Fax PWB
(PL
18.5)
Status Indicator RAPs
033-320, 033-321
033-321 Fax PWB No Response on Booting RAP
BSD-ON:
BSD 34.1 - FAX
Fax does not respond to Controller within a specified time at booting
Procedure
•
Switch the power off, then on.
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the PWB's in the FAX Module
•
Check the sw version of the fax & controller sw - update if required
•
Perform FAX Diagnostic
•
Replace the Fax PWB
07/2011
2-512
BUS Updated 12/2011
GP 13
(PL
18.5)
WorkCentre 5335 Family Service Documentation
Initial Issue