Rep 5.5 Dadf Feeder Assembly - Xerox workcentre 5335 series Service Manual

(1) Release the hooks (x2).
Figure 3 Releasing Hooks
6. Close the DADF gently.
7. Remove the DADF Rear Cover. (Figure
(1) Remove the DADF Rear Cover in the direction of the arrow.
(A) Hook
Figure 4 Removing DADF Rear Cover
Replacement
1. To install, carry out the removal steps in reverse order.
Repairs & Adjustments
REP 5.4, REP 5.5
4)
BUS Updated 12/2011

REP 5.5 DADF Feeder Assembly

Parts List on PL 51.2
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the DADF Front Cover.
3. Remove the DADF Rear Cover.
4. Remove the DADF. (REP 5.1)
5. Remove the DADF Document Tray.
6. Disconnect the DADF PWB connectors.
(1) Disconnect the connectors (x4).
(2) Remove the self-tapping screw and the Ground Wire.
Figure 1 DADF Connectors
7. Remove the DADF Feeder Assembly.
(1) Remove the self-tapping screw.
(2) Remove the DADF Feeder Assembly in the direction of the arrow.
07/2011
4-16
(REP 5.3)
(REP 5.4)
(REP 5.9)
(Figure 1)
(Figure 2)
WorkCentre 5335 Family Service Documentation
Initial Issue