Table of Contents
Advertisement
027-727 Extension Server Parameters RAP
The parameter used for the application interface is incorrect.
Procedure
•
Check the destination host of the application interface and then repeat the operation.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation
027-728 Extension Server File RAP
The number of files requested to be sent exceeded the maximum number of files that can be
sent during Web service interface (this occurs when a single-page document is being stored).
Procedure
•
Set the job so that the maximum number of files that can be sent will not be exceeded and
then repeat the operation.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
(GP
6,
GP
16)
module, EEPROM)
•
Check the sw version of the controller sw - update if required
07/2011
2-487
BUS Updated 12/2011
(GP
6,
GP
16)
Status Indicator RAPs
027-727 , 027-728
Advertisement
Table of Contents
