Rep 5.9 Dadf Document Tray - Xerox workcentre 5335 series Service Manual

Figure 2 Right Counter Balance Removal
Replacement
1. To install, carry out the removal steps in reverse order.
2. If it was replaced, perform checking for DADF Lead-Skew Adjustment.
Initial Issue
WorkCentre 5335 Family Service Documentation

REP 5.9 DADF Document Tray

Parts List on
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the DADF Front Cover.
3. Remove the DADF Rear Cover.
4. Disconnect the connector of the DADF Document Set LED.
(1) Remove the self-tapping screw.
(2) Remove the LED Bracket.
(3) Remove the wire harness from the hook.
(4) Disconnect the connector.
(ADJ 5.1)
5. Disconnect the connector.
(1) Remove the clamp.
(2) Disconnect the connector of the P/J756.
(3) Remove the P/J756 wire harness from the Harness Guide.
07/2011
4-21
BUS Updated 12/2011
PL 51.4
(REP 5.3)
(REP 5.4)
Figure 1 DADF Set LED Connector
(Figure 2)
(Figure 1)
Repairs & Adjustments
REP 5.8, REP 5.9