102-317 Usb Dongle Pagepack Setting Fault; 102-318 Usb Dongle Country Code Setting Fault - Xerox workcentre 5335 series Service Manual

102-317 USB Dongle PagePack Setting Fault

Initial Actions
Switch the Power Off then On.
Connect the Dongle to the Front panel USB port and retry
Verify that the correct Dongle is present
Procedure
Order new (correct) Dongle. If this does not resolve the problem, replace the ESS PWB
35.2).
Status Indicator RAPs
102-317, 102-318

102-318 USB Dongle Country Code Setting Fault

Initial Actions
Switch the Power Off then On.
Connect the Dongle to the Front panel USB port and retry
Verify that the correct Dongle is present
Procedure
(PL Order new (correct) Dongle. If this does not resolve the problem, replace the ESS PWB
35.2).
07/2011
2-844
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation
(PL