Rep 5.3 Dadf Front Cover; Rep 5.4 Dadf Rear Cover - Xerox workcentre 5335 series Service Manual

REP 5.3 DADF Front Cover

Parts List on PL 51.2
Removal
1. Switch off the power and disconnect the power cord.
2. Open the Top Cover.
3. Open the DADF.
4. Remove the DADF Front Cover. (Figure
(1) Remove the self-self-tapping screws (x4).
(2) Remove the DADF Front Cover.
Figure 1 DADF Front Cover Removal
Replacement
1. To install, carry out the removal steps in reverse order.
Initial Issue
WorkCentre 5335 Family Service Documentation
1)
BUS Updated 12/2011

REP 5.4 DADF Rear Cover

Parts List on PL 51.2
Removal
1. Switch off the power and disconnect the power cord.
2. Turn the DADF Document Tray upside down.
(1) Open the Top Cover.
(2) Turn the DADF Document Tray upside down.
Figure 1 DADF Upside Down
3. Remove the screws that secure the DADF Rear Cover.
(1) Remove the screws (x2).
Figure 2 DADF Rear Cover
4. Open the DADF.
5. Release the hooks of the DADF Rear Cover.
07/2011
4-15
(Figure 1)
(Figure 2)
(Figure 3)
Repairs & Adjustments
REP 5.3, REP 5.4