Table of Contents
Advertisement
Regular Toner Contamination In Process Direction (Side 2)
Figure 1 Regular Toner Contamination In Process Direction (Side 2) Defect Sample
Cause
1.
94mm pitch -> Fuser Pressure Roll: Scratches or foreign substances
2.
59mm pitch -> BRT Roll: Dirt, scratches or paper size mismatch
3.
44mm pitch -> Pinch Roll: Dirt
Corrective Action
1.
1, 2, 3: Clean or replace the relevant parts.
2.
2: Change the tray settings.
Initial Issue
WorkCentre 5335 Family Service Documentation
Transparency Blocking
Cause
1.
Transparencies were continuously printed in Plain Paper mode.
Corrective Action
1.
Select Transparency mode.
07/2011
3-35
BUS Updated 12/2011
Figure 1 Transparency Blocking Sample Image
Regular Toner Contamination In Process Direction
Image Quality
Advertisement
Table of Contents
