Table of Contents
Advertisement
Figure 6 Ground Plate Removal
16. Remove the bearing at the front.
(Figure
(1) Remove the E-Clip.
(2) Remove the bearing.
Figure 7 Front Bearing Removal
17. Remove the Takeaway Roll.
(Figure
(1) Remove the Takeaway Roll.
Repairs & Adjustments
REP 5.16
7)
8)
BUS Updated 12/2011
Figure 8 Takeaway Roll Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
Install the Belt (A) to the Pulley of the DADF Registration Motor.
Figure 9 Belt Installation
07/2011
4-30
(Figure
9)
Initial Issue
WorkCentre 5335 Family Service Documentation
Advertisement
Table of Contents
