024-934 Paper Type Mismatch Rap; 024-936 Tray 2 Paper Mismatch Rap - Xerox workcentre 5335 series Service Manual

024-934 Paper Type Mismatch RAP

Operation Error. Paper Type Mismatch. This error occurs when the paper fed is different from
that specified in the Controller (Plain paper and Heavyweight cannot be recognized).
Procedure
• Load the specified media.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - update if required
Initial Issue
WorkCentre 5335 Family Service Documentation

024-936 Tray 2 Paper Mismatch RAP

BSD-ON:
Operation Error. Tray 2 Paper Type Mismatch.
1. Transparencies are loaded in Tray 2, when Tray 5 should have been used.
2. Other paper is loaded when a Transparencies job is performed
3. Transparencies with borders was detected.
Jam occurs when borders were detected by checking transparencies for borders (by the
(GP 16)
OHP Sensor) after feeding started.
Procedure
• Check UI Settings and ensure that Tray 5 is selected with the correct media.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - update if required
07/2011
2-411
BUS Updated 12/2011
BSD 7.2 - Tray 2 Paper Size Sensing
(GP 16)
Status Indicator RAPs
024-934, 024-936