024-966 ATS/APS Destination RAP
APS/ATS is unable to detect the paper size.
Initial Actions
Change the Paper that is selected or change the tray.
Procedure
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required
Status Indicator RAPs
024-966, 024-967
024-967 Mixed Width Paper (Stapler Job) RAP
Paper Width Mix was detected during stapling.
Initial Actions
•
Power Off/On
Procedure
•
Cancel stapling for that job.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
(GP
16)
module, EEPROM)
•
Check the sw version of the controller sw - update if required
07/2011
2-422
BUS Updated 12/2011
(GP
16)
Initial Issue
WorkCentre 5335 Family Service Documentation