Xerox workcentre 5335 series Service Manual page 1137

5. Remove the Top Cover (Figure 4).
a. Remove the Screws (4).
b. Lift the cover up and remove it.
Figure 4 Removing Screws
6. Remove the Front Cover (Figure 5).
a. Remove the Screws (3).
b. Pull the top of the cover out and lift it off.
Figure 5 Removing Screws
Repairs & Adjustments
REP 9.4
7.
a
Replacement
1.
a
07/2011
4-76
BUS Updated 12/2011
Remove the HVPS (Figure 6).
a. Release the wire harness from the clamp and disconnect the connector.
b. Remove the Screws (2) and pull the HVPS out.
b
a
Figure 6 Removing The HVPS
To reinstall, carry out the removal steps in reverse order.
WorkCentre 5335 Family Service Documentation
Initial Issue