027-565 Smb Protocol Error 4-025 Rap; 027-566 Smb Protocol Error 4-026 Rap - Xerox workcentre 5335 series Service Manual

027-565 SMB Protocol Error 4-025 RAP

SMB protocol error. Cannot connect.
Procedure
Check that the authentication server and the device can communicate through the network.
(Check the network group, TCP/IP Settings, check the communication at Port No. 137 (UDP)/
Port No. 138 (UDP)/Port No. 139 (TCP))
Switch the power off, then on. Perform the same operation again.
Status Indicator RAPs
027-565, 027-566

027-566 SMB Protocol Error 4-026 RAP

SMB protocol error. SMB (TCP/IP) is not active. The library cannot be initialized.
Procedure
Check on CentreWare Internet Services that SMB (TCP/IP) is active on the [Port Status]
screen of the [Properties] tab.
07/2011
2-466
BUS Updated 12/2011
Initial Issue
WorkCentre 5335 Family Service Documentation