Table of Contents
Advertisement
Figure 6 Carriage Cable
2.
Wind the Carriage Cable at the spring end around the pulley for 2.5 rounds
(1) Wind the cable 2.5 rounds.
(2) Fix the cable at the spring end on the Frame with tape.
Figure 7 Winding Carriage Cable
3.
Wind the Carriage Cable at the ball end around the pulley for 3 rounds
(1) Wind the cable 3 rounds.
(2) Fix the cable wound on the pulley with tape to prevent it from getting loose.
Repairs & Adjustments
REP 6.5
(Figure
7)
The figure below shows the number of rounds made by Carriage Cable at the front and
rear
(Figure
4.
Install the ball end of the Carriage Cable
(1) Hang the cable on the pulley at the front of the Half Rate Carriage.
(Figure
8)
(2) Hang the ball on the notch of the Frame.
07/2011
4-42
BUS Updated 12/2011
Figure 8 Taping Carriage Cable
9)
Figure 9 Front and Rear Carriage Cable
(Figure
10)
WorkCentre 5335 Family Service Documentation
Initial Issue
Advertisement
Table of Contents
