Rep 8.3 Tray 3 Feeder Assembly - Xerox workcentre 5335 series Service Manual

REP 8.3 Tray 3 Feeder Assembly

Parts List on PL 11.7
Removal
1. Switch off the power and disconnect the power cord.
2. Remove Paper Trays 2, 3, and 4 REP
3. Perform the following (Figure 1).
a. Remove the Left Lower Cover (2 Screws).
b. Open the Left Cover Assembly.
Figure 1 Covers
4. Remove the Harness Cover (1 Screw)
Screw
Figure 2 Removing Screw
Repairs & Adjustments
REP 8.3
7.1.
Screws
(Figure 2).
BUS Updated 12/2011
5. Disconnect Feeder 3 P/Js (2), and release the harness from the clamp
6. Perform the following (Figure 4).
a. Removing the Feed Out Chute.
b. Remove Tray 3 Feeder left side mounting screws (2).
07/2011
4-64
(Figure
PJ
Figure 3 P/Js
Feed Out Chute
Screws
Figure 4 Removal
WorkCentre 5335 Family Service Documentation
3).
Initial Issue