Rep 7.1 Paper Trays 1, 2, 3, And 4 Assembly - Xerox workcentre 5335 series Service Manual

REP 7.1 Paper Trays 1, 2, 3, and 4 Assembly

Parts List on PL 9.1, PL 11.2
Removal
Paper Trays 1 and 2
1. Remove the paper from the tray.
2. Pull the tray open.
3. Lift up the front of the tray so the rollers clear the stops and remove the tray.
Replacement
1. To reinstall, carry out the removal steps in reverse order.
Removal
Paper Tray 3
1. Remove the paper from the tray.
2. Pull the tray open.
3. Remove Paper Tray 3.
a. Loosen the screw holding the stop bracket and move the stop bracket away from the
tray (Figure 1).
b. Remove the tray.
a
Figure 1 Removing Screw
Replacement
1. To reinstall, carry out the removal steps in reverse order.
Initial Issue
WorkCentre 5335 Family Service Documentation
Removal
Paper Tray 4
When removing Tray 4 be sure to support the Tray 4 Transport Assembly to prevent damaging
the tray or transport assembly.
1. Remove the paper from the tray.
2. Pull the tray open.
3. Remove Paper Tray 4.
a. Remove the screw and stop bracket
b. Remove the tray.
Replacement
1. To reinstall, carry out the removal steps in reverse order.
07/2011
4-53
BUS Updated 12/2011
CAUTION
(Figure 2).
Figure 2 Removing Screw
Repairs & Adjustments
a
REP 7.1