Xerox workcentre 5335 series Service Manual page 1085

Figure 2 J753 Location
11. Remove the wire harness of the solenoid from the Harness Guide.
(1) Disconnect the connector (Blue).
(2) Disconnect the connector (White).
(3) Remove the wire harness from the Harness Guide.
Figure 3 Solenoid Harness Removal
12. Disconnect the connector. (Figure 4)
(1) Disconnect the connectors (x4).
Repairs & Adjustments
REP 5.11
(Figure 3) 13. Remove the Harness Guide and the wire harness.
(1) Remove the screw.
(2) Remove the screw and the Ground Wire.
(3) Remove the Harness Guide and the wire harness.
Replacement
1. To install, carry out the removal steps in reverse order.
2. Hang the J753 wire harness to the hook (A).
(A)Hook
07/2011
4-24
BUS Updated 12/2011
Figure 4 Harness Connectors
(Figure 5)
Figure 5 Harness Removal
(Figure 6)
WorkCentre 5335 Family Service Documentation
Initial Issue