Creating A Dhcp Server Group - HP 1920 Series User Manual

4.
Table 94 Configuration items

Creating a DHCP server group

1.
2.
Downloaded from www.Manualslib.com
Click Apply.
Item Description
DHCP Service Enable or disable global DHCP.
Enable or disable unauthorized DHCP server detection.
There are unauthorized DHCP servers on networks, which reply DHCP clients with
wrong IP addresses.
With this feature enabled, upon receiving a DHCP request, the DHCP relay agent
Unauthorized Server
records the IP address of any DHCP server that assigned an IP address to the DHCP
Detect
client and the receiving interface. The administrator can use this information to check
out DHCP unauthorized servers. The device puts a record once for each DHCP
server. The administrator needs to find unauthorized DHCP servers from the log
information. After the information of recorded DHCP servers is cleared, the relay
agent re-records server information following this mechanism.
Enable or disable periodic refresh of dynamic client entries, and set the refresh
interval.
A DHCP client sends a DHCP-RELEASE unicast message to the DHCP server through
Dynamic Bindings
the DHCP relay agent to relinquish its IP address. In this case the DHCP relay agent
Refresh
simply conveys the message to the DHCP server, thus it does not remove the IP
address from dynamic client entries. To solve this problem, the periodic refresh of
dynamic client entries feature is introduced.
With this feature, the DHCP relay agent uses the IP address of a client and the MAC
address of the DHCP relay agent interface to periodically send a DHCP-REQUEST
message to the DHCP server.
•
If the server returns a DHCP-ACK message or does not return any message within
a specific interval, which means that the IP address is assignable now, the DHCP
Track Timer Interval
relay agent ages out the client entry.
•
If the server returns a DHCP-NAK message, which means the IP address is still in
use, the relay agent does not age it out.
If the Auto option is selected, the refresh interval is calculated by the relay agent
according to the number of client entries.
From the navigation tree, select Network > DHCP to enter the default DHCP Relay page shown
in Figure 274.
In the Server Group area, click Add to enter the page shown in
Figure 275 Create a server group
manuals search engine
Figure
300
275.